Husky Altanium Neo5 - Header and Footer; Header - Controller Function Buttons

Page 17
User Guide v 1.0 — August 2018 Altanium Neo5
4.2.3 Header and Footer
The home screen has a header
and a footer.
.
The same header and footer appears on each screen.
4.2.3.1 Header — Controller Function Buttons
Button Description
Stop - Removes the power from all the zones, regardless of system
condition.
Start - Applies power to the zones that have a setpoint.
Standby button - Places the system in standby. If a timer is active, the time
remaining is displayed in the system header.
NOTE: You cannot put the system in standby during the ART process.
Boost button - Places the system in boost mode. If a timer is active, the
time remaining is displayed in the system header.
NOTE: You cannot put the system in boost mode during the ART process.