Husky Altanium Neo5 - Replacing the Touch Monitor - Integrated Configuration

Page 143
User Guide v 1.0 — August 2018 Altanium Neo5
15.4.1 Replacing the Touch Monitor — Integrated Configuration
1. Rotate the touch monitor to the full forward position.
2. This will expose the mini USB connector, HDMI connector and top set of fasteners
holding the touch monitor to the mounting bracket.
WARNING!
Electrical and mechanical hazard - risk of damage to the equipment. Turn off all power
to the system and disconnect it completely from the main input power. Follow the local
Lock Out Tag Out procedures.
WARNING!
Pinch Point Hazard - keep hands and fingers clear of the Neo5 touch monitor hinge
mechanism.