Husky Altanium Neo5 - Zone Selection in the Text View Screen; Sorting; Quick Set Screen

Page 53
User Guide v 1.0 — August 2018 Altanium Neo5
7.4.1 Zone Selection in the Text View Screen
Use the Text View screen to select one or multiple zones.
1. To view one zone, touch anywhere in the row of that zone.
2. To view multiple zones, touch and hold the first zone. Then drag up or down to the last
zone. All zones between the two zones are selected.
3. The view will automatically go to the Quick Set screen.
7.4.2 Sorting
You can sort column data on the Text View screen and all other screens that have column
headers. Touch the header field. The ascending or descending arrows ( )appear
next to the column header name. Touch the column header to reverse the order.
Information can be sorted according to the dynamic columns (for example, current (Amps),
voltage (Volts), etc.). This can help you when trying to figure out which zone is drawing the
most current at any moment.
7.5 Quick Set Screen
Use the Quick Set screen to change the zone settings.
On the Home screen, select
.
NOTE: When you select a zone in the Neo2, Multi-Group, or Text view screens the Quick
Set screen will automatically show.