v 1.0 — August 2018 Altanium Neo5
Page 6
1.8.2 Single Stack Lifting Instructions:
Do the steps that follow to lift the single stack Neo5.
Lifting devices (crane or forklift) and straps vary in lifting ability and lengths. See the table
that follows for the correct lifting ability and lengths.
1. Place each of the webbed straps under the controller. See the table above for the correct
strap lengths.
a. For a single stack Neo5, the webbed straps go under the equipment from left to
right.
2. Bring the straps up and above the Neo5 and attach them to the lifting device.
a. Make sure the straps are positioned between the caster wheels and the retaining
brackets under the base of the controller.
Altanium Controller
Webbed Straps Rated 2903
kg (6400 lb)
Ratchet Strap
Lifting Device (Lifting
Ability)
Neo5 Single Stack Two, 2.44 m x 25.4 mm
(8 ft x 1 in.)
One, 1.52 m (5 ft) 227 kg (500 lb)
To Next Page
Loading...
