Husky Altanium Neo5 - Header - System Status Indicators; Header - Navigation Buttons

v 1.0 — August 2018 Altanium Neo5
Page 18
4.2.3.2 Header — System Status Indicators
4.2.3.3 Header — Navigation Buttons
Indicator Description
°F
At Temperature:
• Flashes when the zones are heating up to the setpoint temperature.
• Solid when all automatic zones are ‘At temperature’.
• Off when the controller is stopped.
• Shows that the temperature values are given as °C or °F.
Company Name is displayed.
System Mode - For a description of each system mode, refer to the Table
at the end of this Chapter.
System Timer - If applicable, displays the time remaining on the timer.
Button Description
Back - Displays the previous screen (maximum of 10 screens back).
Forward - Moves to the last screen that was displayed (maximum of 10
screens forward).
Home - Goes to the Home screen.
System Setup button - Goes to the System Setup screen.