Page 37
User Guide v 1.0 — August 2018 Altanium Neo5
6.1.1 Saving Changes to a Mold Setup File
Once a Mold Setup file has been loaded, you can permanently save changes made to it.
1. On the Mold Setup screen, touch the Save Changes button. This will display the Mold
Setup - Save dialog box for confirming the mold and name of the file that the changes
are to be saved to.
2. Touch . Changes are saved.
6.1.2 Saving the Current Mold Setup File as a New File
Once a Mold Setup file has been loaded, it can be saved as a new file.
To save the currently loaded Mold Setup file as a new file, do the steps that follow:
1. On the Mold Setup screen, touch the Save As button. This will display the keyboard.
2. Enter the new mold name, then .
6.1.3 Loading an Existing Mold Setup File
After a Mold Setup file has been created it is automatically loaded as the current Mold Setup
in the system.
To load a different Mold Setup, do the following:
1. On the Mold Setup screen, select the Mold Setup folder that contains the Mold Setup
file to be loaded.
2. Touch the name of the mold setup file to be loaded.
3. Touch the Load Mold Setup button to load the selected mold setup.
Once a mold setup is loaded, its name will be displayed at all times on the Mold Setup
Info button in the System Footer.
To Next Page
Loading...
