v 1.0 — August 2018 Altanium Neo5
Page 35
Chapter 6 Mold Setups
The mold setup has the process parameters necessary to operate the hot runner system.
6.1 Mold Setup Screen
The Mold Setup screen stores and manages files such as mold setups, images, documents
and reports. Files are stored in mold, system and user folders. Each mold folder allows the
storage of mold setups, images and documents associated with that specific mold. The
screen is divided into two panes. The left side contains all directories that are on the Neo5
hard drive and the right side displays all available directories and files from an external
source, such as a USB or a network file share.
1. To access the mold setup screen, on the home screen in the System Configuration row
select File Management.
Or
2. Touch in the footer of any screen.
will show, in the left pane, mold setup files
stored in the mold folders, if molds is selected.
will show, in the left pane, image files stored in
the mold folders, if molds is selected.
will show all Comma Separated Value (CSV)
files stored in the mold folders in the left pane, if molds is selected.
will show all available file types stored in the
molds folders in the left pane, if molds is selected.
To Next Page
Loading...
