Page 57
User Guide v 1.0 — August 2018 Altanium Neo5
Regulation — Sets the regulation mode for the selected zone(s). AUTO or Automatic (closed loop) uses
the thermocouple feedback to control the temperature. Manual (open loop) means the system will
only apply power (0 to 100%), user selected, to the heater and not look for thermocouple feedback.
Monitor means the system will only monitor the temperature of the zone (no power applied to
heater).
Alarm Window — Use the keypad to adjust the upper and lower alarm limits.
Abort Window — Use the keypad to adjust the upper and lower abort limits.
To Next Page
