EasyManua.ls Logo

HydraMaster Boxxer 318 - Warranty INFORMATION; Blower; High Pressure Water Pump

Default Icon
121 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10-1: Warranty Information
10 - Warranty Information
This section lists causes of component failure that specically void warranty coverage
to avoid misunderstandings which might occur between truckmount owners and the
manufacturer. Such causes as listed in this section shall constitute abuse or neglect.
The following topics are covered in this section
Blower
High Pressure Water Pump
Vacuum Tank
Chemical System
Control Panel
Vacuum and Solution Hoses
Cleaning Wand
Water Heating System
Hard Water Deposits
Warranty Procedure
BLOWER
Failure to lubricate the impellers daily with an oil based lubricant.
Failure to lubricate the bearings as recommended in the blower manual.
Failure to maintain the proper oil levels in the blower.
Failure to use the correct oil grade and viscosity as recommended in the blower
manual.
Failure to properly maintain blower safeguard systems such as waste tank lter screen,
vacuum safety relief valve and waste tank automatic shut-off system.
Allowing foam to pass through the blower.
HIGH PRESSURE WATER PUMP
Failure to maintain the proper oil level as recommended in the pump manual.
Failure to change the oil in the pump at recommended intervals.
Failure to protect the pump against freezing.
Failure to maintain the pump protection shut-off system.
Failure to use water softener in hard water areas.
Use of improper chemicals.

Table of Contents

Related product manuals