General Information: 1-8
Installation Responsibilities
Ensure proper payload capacity. It is the distributor’s responsibility to verify that the •
equipment package does not exceed the vehicle capacity.
Ensure installation of a safe fuel tap system and through-oor ttings as provided by
•
HydraMaster.
Proper placement of the truckmount, recovery tank, fresh water tank, and accessories
•
in the vehicle and securing them with bolts and back up plates. The distributor should
verify that the owner is in agreement with the layout.
Ensure proper connection of the fuel lines.•
Ensure proper connection and installation of the battery. Verify that the battery is in •
accordance with HydraMaster’s recommendation.
Check the pump, vacuum blower and engine oil levels prior to starting the
•
truckmount.
Start and run the truckmount and check that all systems function properly.
•
Test all hoses, wands, etc. for correct operation.•
Ensure timely return of the document package.•
To Next Page
Loading...
