2
Part 1 Installation
3. SSEL Controller Functions
The functions provided by the SSEL controller are structured in the following manner.
The SSEL controller has the “program mode” in which SEL programs are input to operate the actuator(s),
and the “positioner mode” in which position numbers are specified from the host PLC to operate the
actuator(s).
The positioner mode provides five sub-modes to meet the needs of various applications.
The program mode has been selected at the factory prior to the shipment of the controller (Other
parameter No. 25 = 0).
Caution: Two modes cannot be selected at the same time.
Program mode
Positioner mode
Standard mode
Product switching mode
2-axis independent mode
Teaching mode
DS-S-C1 compatible mode
SSEL
To Next Page
Loading...
Need help?
General
