21
Part 1 Installation
[16] Axis 2 encoder/sensor
connector:
This connector is used to connect the encoder/sensor cables for axis 2.
[17] Axis 1 absolute-data backup
battery connector:
This connector is used to connect the absolute-data backup battery for
axis 1. (This connector is required only when the actuator is of absolute
encoder specification.)
[18] Axis 2 absolute-data backup
battery connector:
This connector is used to connect the absolute-data backup battery for
axis 2. (This connector is required only when the actuator is of absolute
encoder specification.)
To Next Page
Loading...
