IBM System x3300 M4 - Page 224

Table 18. IMM2 error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v If an action step is preceded by “(Trained technician only),” that step must be performed only by a trained
technician.
806f0123-2101xxxx Reboot of system %1
initited by %2. (%1 =
ComputerSystem.ElementName)
(%2 =
Watchdog.ElementName)
Info This message is for
the use case when
an implementation
has detected a
Reboot by a
Watchdog
occurred.
No action; information only.
806f0125-0c01xxxx Front panel entity
has been detected
Absent.
Info A front panel
entity has been
detected absent.
No action; information only.
806f0013-1701xxxx A front panel NMI
has occurred on
system %1. (%1 =
CIM_ComputerSystem.
ElementName)
Error An operator
information panel
NMI/diagnostic
interrupt has
occurred.
1. Check the device driver.
2. Reinstall the device driver.
3. Update all device drivers to the
latest level.
4. Update the firmware (UEFI and
IMM) (see “Updating the firmware”
on page 111).
806f0313-1701xxxx A software NMI has
occurred on system
%1. (%1 =
CIM_ComputerSystem.
ElementName)
Error A software NMI
has occurred.
1. Check the device driver.
2. Reinstall the device driver.
3. Update all device drivers to the
latest level.
4. Update the firmware (UEFI and
IMM) (see “Updating the firmware”
on page 111).
806f0823-2101xxxx Watchdog Timer
interrupt occurred
for %1. (%1 =
Watchdog.ElementName)
Info This message is for
the use case when
an implementation
has detected a
Watchdog Timer
interrupt occurred.
No action; information only.
806f0a13-0301xxxx A Fatal Bus Error
has occurred on
system CPU 1 PECI.
Error A bus fatal error
has been detected.
1. Reseat the microprocessor, and then
restart the server.
2. Replace microprocessor n.
(n = microprocessor number)
806f0a13-0302xxxx A Fatal Bus Error
has occurred on
system CPU 2 PECI.
Error A bus fatal error
has been detected.
1. Reseat the microprocessor, and then
restart the server.
2. Replace microprocessor n.
(n = microprocessor number)
81030012-2301xxxx OS RealTime Mod
state has deasserted.
Info OS RealTime Mod
state has
deasserted.
No action; information only.
206 System x3300 M4 Type 7382: Installation and Service Guide