IBM System x3300 M4 User Manual

9. Removing the USB connector and operator information panel assembly out
from the server if there is one present. See “Removing the front USB connector
and operator information panel assembly” on page 380
10. Slide the USB connector and operator information assembly into the right
position shown as the illustration.
11. Connect the USB cable to the front USB connector on the system board. Route
the USB cable as shown in the following illustration.
382 System x3300 M4 Type 7382: Installation and Service Guide

IBM System x3300 M4 Specifications

General

Brand	IBM
Model	System x3300 M4
Category	Server
Language	English