Installing Windows NT Workstation Software
4
Click on Setup..., and change the interrupt level and DMA
channel; then click on OK.
5
If the base I/O address is also changed by the ThinkPad
Feature program, the ESS Audio Configuration Panel warns you
that you need to change the base I/O address also. Set the
value you specified in the ThinkPad Features program.
6
Shutdown and restart Windows NT to make the changes
effective.
Playback and Recording
You may be able to record or play back the WAVE file or play back
MIDI sounds using Sound Recorder or Media Player, available in
the Accessories group. For more information, refer to
Microsoft
Windows NT Workstation System Guide.
Installing the ThinkPad PCI-IDE Driver for Windows NT
To install the ThinkPad PCI-IDE device driver:
1
Close any running applications; then from the Program
Manager, double-click on Windows NT Setup in the Main
group.
2
Select Options and then Add\Remove SCSI Adapters from
the menu bar.
3
From the SCSI Adapter Setup dialog box, click on Add... to
add a new driver.
A message box explains how to recover from a bad
installation.
4
Select the OK button.
The Select SCSI Adapter Option dialog box appears.
Chapter 7. Installing Software 225
To Next Page
Loading...
Need help?
General