Advanced Information for PC Cards
 
OS/2  PCMCIA Storage API Device Driver
OS/2
This device driver provides a communication function between PC Card
Director or the mount utility and the OS/2  PCMCIA ATA card device driver.
As a result, a utility in the upper layer can get the drive letter or partition
information for the PCMCIA storage card.
The following is a line from the CONFIG.SYS file that describes the Storage
API device driver:
DEVICE =[drive:][directory]PCMSSDIF.SYS
Flash Card Memory Technology Driver
This driver is used to read and write to a Flash card. It is used by the DOS
storage card device driver (PAWATASF.SYS)  and OS2 Flash card driver
(PCM2FLSH.SYS).
The following is a line from the CONFIG.SYS file that describes the Flash
Card Memory Technology driver, according to the operating system:
 
For OS/2:
DEVICE =[drive:] [directory] FLSH2MTD.SYS
 Memory Technology driver
DEVICE =[drive:] [directory] PCM2FLSH.SYS
Storage card device driver
For DOS and Windows:
DEVICE=[drive:] [directory] IBMDOSCS.SYS
 Card Services
DEVICE=[drive:] [directory] IBMDSCSE.SYS
 Enhanced Card Services
DEVICE=[drive:] [directory] FLSHDMTD.SYS
 Memory Technology driver
DEVICE=[drive:] [directory] PAWATASF.SYS
 ATA SRAM Flash card device driver
    Appendix B. Advanced Information for PC Cards 287