IBM TS1160

MANUAL TEST MENU:
+----------------------------------------------------------------+
| 1: set device special file 2: display symbols |
| 3: set block size R/W (now !0 fixed) 4: set block count (R/W)|
| 5: set return error when fail 6: set/reset trace |
| 7: set exit on unexpected result 8: Base Mode |
+----------------------------------------------------------------+
|10: ioctl return library inventory 11: ioctl move medium |
|12: ioctl initialize element status |
+----------------------------------------------------------------+
|20: open 21: close |
|22: read 23: write |
|24: read and display block 25: flush (buffer->media)|
|26: read block id 27: erase |
|28: locate block id 29: display block data |
+----------------------------------------------------------------+
|30: write filemark(s) 31: rewind |
|32: forward space filemark(s) 33: unload |
|34: reverse space filemark(s) 35: load (3592 Sys Mode) |
|36: forward space record(s) 37: return error |
|38: reverse space record(s) 39: test unit ready |
|43: set media parms (block size) 44: set dev parms (comp.)|
|46: get device information |
|48: get medium information 49: inquiry |
|53: space EOD 54: display message |
+----------------------------------------------------------------+
|70: system command |
| |
+----------------------------------------------------------------+
|80: Force Dump 81: Read Dump |
|82: Update Code 83: Log Sense |
|84: Get Last Sense 85: Get Version |
|86: Associative/Persistant WProtect 87: Read/Write Test |
|88: Find Devices 89: Get MTDevice info |
+----------------------------------------------------------------+
|99: return to main menu |
| |
+----------------------------------------------------------------+
enter selection:
Figure 91: Library mode: Windows environment
TAPEUTIL in Windows system environment (NTUTIL)
277