45
Figure 5-22 Sample Injector Function Screen 2
6. Read the screen prompts carefully, you will know the information
about the fuel injector code. Follow the screen operation step by
step, tap [OK] to perform the next step.
Figure 5-23 Sample Injector Screen 3
NOTE
During the procedure, the engine shall be off. And the supply voltage
shall be 12.5V (standard). If the voltage is less than the standard, then
the procedure may fail.
7. As shown in the figure below, select the serial number of the fuel
injector to be replaced. For example, select the injector 1 number.
To Next Page
Loading...
