109
12
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
t Rotate [DIAL]
†
to select “MY CALL SIGN” in CALL SIGN
set mode, then push [ï](5)
†
to enter “MY CALL SIGN” set-
ting.
y Rotate [DIAL]
†
to select the desired call sign.
• Input the call sign if the desired call sign is not stored in the
transceiver. See pgs. 34 and 35 for detail.
u Push [ï](5) to set call sign and push [MENU/LOCK] to
return to frequency indication.
CAUTION!: Use digital code squelch when operating with
more than 3 stations. Because the digital call sign squelch
function recognizes “MY CALL SIGN,” the digital call sign
squelch function can be used when operating with only one
station.
NOTE:
• The tone/DTCS code squelch opens sometimes when
other stations communicate with adjacent tone frequency
or DTCS code.
To Next Page
Loading...
