Icom IC-91A - I Beep Tones; I Dial Speed Acceleration; I Key Lock Effect

113
12
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Beep tones
You can select to have confirmation beeps sound at the push
of a switch. The output level can be adjusted within 39 levels
with “BEEP LEVEL” in sounds set mode.
(p. 102)
You can select silent operation by turning beep tones OFF
with “KEY-TOUCH BEEP” in sounds set mode.
(p. 102)
■ Dial speed acceleration
The dial speed acceleration automatically speeds up the tun-
ing dial speed when rotating [DIAL] rapidly.
This function can be turned ON and OFF with “DIAL SPEED”
in set mode.
(p. 89)
■ Key lock effect
D Lock function
The lock function prevents accidental frequency changes and
accidental function access.
➥ Push [MENU/LOCK] for 1 sec. to toggle the lock function
ON and OFF.
• [PWR], [VOL], [SQL] and [PTT] can still be accessed while the
lock function is ON. (default)
D Key lock type
While the lock function is ON, [PWR], [VOL], [SQL] and
[PTT] can still be accessed. Accessible switches can be set
to one of 4 groups with “LOCK” in set mode.
(p. 90)
•“NORMAL” : [PWR], [VOL], [SQL] and [PTT] are accessible.
•“NO SQL” : [PWR], [SQL] and [PTT] are accessible.
•“NO VOL” : [PWR], [VOL] and [PTT] are accessible.
•“ALL” : [PWR] and [PTT] are accessible.
MENU screen ➪ SET MODE ➪ LOCK
(Push [MENU/LOCK]) (Rotate [DIAL]
†
, then push [ï](5)
†
.)
A
FMFM
439 540
P SKIPSKIP
Appears.
MENU screen ➪ SET MODE ➪ DIAL SPEED
(Push [MENU/LOCK]) (Rotate [DIAL]
†
, then push [ï](5)
†
.)
MENU screen ➪
SOUNDS
➪
KEY-TOUCH BEEP
(Push [MENU/LOCK]) (Rotate [DIAL]
†
, then push [ï](5)
†
.)
MENU screen ➪ SOUNDS ➪ BEEP LEVEL
(Push [MENU/LOCK]) (Rotate [DIAL]
†
, then push [ï](5)
†
.)
†
[DIAL] ↔ [
∫∫
](2)/[
√√
](8) [ï](5) ↔ [
≈≈
](6)