111
12
OTHER FUNCTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Pocket beep function
q Set the desired operating frequency.
w Set the desired CTCSS tone, DTCS code, Digital call sign
or Digital code.
e Push and hold [TONE](7)/[DSQ](7) for 1 sec. several
times to activate the pocket beep, DTCS beep, Digital call
sign beep or Digital code beep. (“TSQLS,” “DTCS
S,” “DSQLS” or “CSQLS”)
• Rotating [DIAL] while pushing [TONE](7)/[DSQ](7) also selects
the tone functions.
r When a signal with the correct tone, code, digital call sign
or digital code is received, the transceiver emits beep
tones for 30 sec. and blinks “S.”
t Push [PTT] to answer or push [SQL] to stop the beeps
and blinking.
■ DTCS polarity setting
q Enter “DTCS P” in DUP/TONE... set mode. (p. 99)
w Rotate [DIAL]
†
to select the desired DTCS polarity mode.
• BOTH N: Normal phase is used for both TX and RX.
(Default)
• TN-RR: Normal phase is used for TX; Reverse
phase for RX.
• TR-RN: Reverse phase is used for TX; Normal
phase for RX.
• BOTH R: Reverse phase is used for both TX and
RX.
e Push [ï](5)
(or [
ΩΩ
](4))
to return to DUP/TONE… set mode,
and push [MENU/LOCK] to return to frequency indication.
To Next Page
Loading...
