Icom IC-91A - FREQUENCY AND CHANNEL SETTING

14
FREQUENCY AND CHANNEL SETTING
4
■ Main band selection
The IC-91A/91AD has two independent operating bands; A
band
(VFO A) and B band (VFO B). A band
(VFO A) can operate
0.495 MHz to 999.990 MHz*, and B band
(VFO B) can operate
118 MHz to 174 MHz and 350 MHz to 470 MHz.
*Some frequency ranges are blocked for the USA version by regula-
tion.
NOTE: When in dualwatch mode, transmission is available
from the MAIN band only.
DD
How to change the main band
➥ Push [MAIN/DUAL] to toggle between A and B band.
➥ Push and hold [MAIN/DUAL] for 1 sec. to turn the dual-
watch operation ON and OFF.
• While in dualwatch operation, the display indicates A band in the
upper half and B band in the lower half.
➥ During dualwatch operation, push [MAIN/DUAL] to select
A band or B band as the main operating band alternately.
DTCS
DTCS
W PS
EM
W PS
FMFM
PRIO
PRIO
+DUP+DUP
+DUP+DUP
FM
146 010
440 000
25
50
µ
000000
µ
000000
DTCS
DTCS
W PS
EMEM
W PS
FMFM
PRIO
PRIO
+DUP+DUP
+DUP+DUP
FM
146 010
440 000
25
50
µ
000000
µ
000000
A
MemoName
µ
PRIOPRIO WXWX EMREMR
DTCSDTCS
FMFM
LOWLOW
ATTATT
146 010
P SKIPSKIP
+DUP+DUP
2525
000
MemoName
µ
PRIOPRIO WXWX EMREMR
DTCSDTCS
FMFM
B
LOWLOW
ATTATT
440 000
P SKIPSKIP
+DUP+DUP
2525
000
Push Push
• Selecting A band • Selecting upper side as main band
• Selecting lower side as main band
• Selecting B band
Push
DTCS
DTCS
W PS
EM
W PS
FM
PRIO
PRIO
+DUP
+DUP
FM
146 010
440 000
25
50
µ
000
µ
000
DTCS
DTCS
W PS
EM
W PS
FM
PRIO
PRIO
+DUP
+DUP
FM
146 010
440 000
25
50
µ
000
µ
000
A
MemoName
µ
PRIO WX EMR
DTCS
FM
LOW
ATT
146010
P SKIP
+DUP
25
000
MemoName
µ
PRIO WX EMR
DTCS
FM
B
LOW
ATT
440000
P SKIP
+DUP
25
000
Single band operation Dualwatch operation
for 1 sec.