39
7
DV MODE OPERATION (Optional UT-121 is required for IC-91A)
7
DD
When calling the desired station
Continued instruction from step x on page 38.
cRotate [DIAL]
†
to select “UR,” then push [ï](5)
†
.
• YOUR CALL SIGN screen is displayed.
vRotate [DIAL]
†
to select the call sign channel in which de-
sired station’s call sign is programmed.
• See page 36 for station call sign programming details.
bPush [ï](5) to set the station’s call sign and return to
CALL SIGN screen.
nPush [MENU/LOCK] to return to frequency indication.
mPerform the instruction steps t and y on page 38.
DD
When sending a CQ
Continued instruction from step x on page 38.
cRotate [DIAL]
†
to select “UR,” then push [ï](5)
†
.
• YOUR CALL SIGN screen is displayed.
vRotate [DIAL]
†
to select the call sign channel in which
“CQCQCQ” is programmed.
Or, select “U” then push [
≈≈
](6) and [CQ](0) in sequence to
set “CQCQCQ.”
bPush [ï](5) to set “CQCQCQ” as the call sign and return
to CALL SIGN screen.
nPush [MENU/LOCK] to return to frequency indication.
mPerform the instruction step t and y on page 38.
To Next Page
