50
7 DV MODE OPERATION (Optional UT-121 is required for IC-91A)
DD
Copying the call record contents into call sign memory
This is a way to copying the call record contents (“CALLER,”
“RXRPT1” and “RXRPT2”) into call sign memory (“UR,” “R1” and
“R2”) at the same time or individually.
qPerform the steps q to e of “D Desired call record indica-
tion” (p. 46) to select the desired call record or call sign.
wPush [
≈≈
](6) to select copy select mode.
• COPY SELECT screen is displayed.
eRotate [DIAL]
†
to select the desired call sign to be copied
from “ALL,” “RXRPT1” and “RXRPT2.”
•“ALL” selection won’t appear when either station or repeater call
sign memory has no blank channel.
• When “ALL” is selected
➥ Push [
≈≈
](6) to copy the selected record’s contents into
the appropriate call sign memory.
• Returns to RX CALL SIGN screen automatically.
• When “CALLER,” “RXRPT1” or “RXRPT2” is
selected
z
Push
[
≈≈
](6) then r
otate [DIAL]
†
to select the desired con-
dition of call sign memory channel selection to be copied to
from “AUTO” and “LIST SEL.”
•“AUTO” selection won’t appear when the appropriate call sign
memory has no blank channel.
• Go to step r when “AUTO” is selected.
xPush [
≈≈
](6), then select the desired call sign memory
channel to copy to with [DIAL].
cPush [
≈≈
](6) to copy the call sign into the selected call
sign memory.
• Returns to RX CALL SIGN screen automatically.
rPush [MENU/LOCK] to return to frequency indication.
To Next Page
