11
3
BASIC OPERATION
3
■ Channel comments
Each channel can be labeled with a unique alphanumeric ID
of up to 10 characters.
Capital letters, small letters, 0 to 9, some symbols (
- . /)
and space can be used.
q Select the desired channel.
• Cancel Dualwatch, Tri-watch or Scan in advance.
w While pushing and holding [H/L], push [16•9] to edit the
channel comment.
• A cursor and the first char-
acter start blinking alter-
nately.
e Push the appropriate key
several times to enter the desired character.
• See the table to the right for available characters.
• Rotate [SELECTOR] or push [Y]/[Z] on the microphone to
move the cursor.
• Push [CE] to clear the channel comment.
• Push [CLR] to cancel and exit the condition.
r Push [ENT] to input and set the comment.
• The cursor and the character stop blinking.
t Repeat steps q to r to program other channel com-
ments, if desired.
• Available characters
KEY CHARACTERSKEY CHARACTERS
1 Q Z q z (space)
2 A B C a b c
3 D E F d e f
4 G H I g h i
5 J K L j k l
6 M N O m n o
7 P R S p r s
8 T U V t u v
9 W X Y w x y
0 - / .
■
AquaQuake water draining function
The IC-M604 uses a new technology to clear water away
from the speaker grill: AquaQuake. AquaQuake helps drain
water away from the speaker housing (water that might
otherwise muffle the sound coming from the speaker). The
IC-M604 emits a vibrating noise when this function is being
used.
➥ While pushing and holding [H/L], turn power ON.
• A low beep tone sounds while [H/L] key is pushed and held to
drain water, regardless of [VOL] control setting.
• The transceiver never accepts a key operation while the
AquaQuake function is activated.
While pushing and holding [PTT] on the optional HM-162,
turn power ON to clear water away from the HM-162.
25W INT
34°34.506N
123°23.236W
UTC 12:00PLEASURE__
To Next Page
Loading...
