44
8
SET MODE
D Weather alert
A NOAA broadcast station transmits a weather alert tone be-
fore important weather information. When “
ON” is selected,
the previously selected (used) weather channel is checked
any time during standby or while scanning. When “
ON with
WX SCAN” is selected, the weather channels are checked
in sequence during standby or while scanning.
The “WX ALERT” indicator blinks until the transceiver is op-
erated after the transceiver detects the alert.
• “WX ALERT” appears instead of “WX” when the function is turned ON.
(Default: OFF)
--Set Mode--
WX Alert
ON
ON with WX SCAN
˘OFF
D Beep tone
You can select silent operation by turning beep tones OFF,
or you can have confirmation beeps sound at the push of a
key by turning beep tones ON.
(Default: ON)
--Set Mode--
Beep
˘ON
OFF
D Internal speaker
When an external speaker is connected and the transceiver’s
internal speaker is not required, the speaker of the transceiver
and the connected microphone can be deactivated.
D LCD contrast
This item adjusts the contrast of the LCD in 8 steps.
D Attenuation level
This item sets the receive attenuation level for the Attenuator
function from 3 levels.
D Automatic foghorn frequency
The audio frequency of the automatic foghorn can be ad-
justed to suit your preference. While this item is selected,
pushing
[PTT] outputs the foghorn— experiment with the
frequencies available until you find one you like.
• Available frequency range is 200 Hz to 850Hz in 50 Hz step.
(Default: 5)
--Set Mode--
Contrast
˘5
4
3
2
<CLR˘Exit / ENT˘OK>
(Default: Min)
--Set Mode--
RF Attenuator
Max
Mid
˘Min
(Default: 400)
--Set Mode--
Foghorn Frequency
˘400
≤
350
300
250
≥
<CLR˘Exit / ENT˘OK>
(Default: ON)
--Set Mode--
Internal Speaker
˘ON
OFF
To Next Page
Loading...
