Icom IC-M604 Instruction Manual

34
6
DSC OPERATION
D Receiving a Geographical Area call
While monitoring Channel 70 and a Geographical Area call
(for the area you are in) is received:
➥ Emergency alarm or beeps sound depending on the re-
ceived category.
➥ “Received Geographic” appears in the display.
25W INT
TAG
Received
Geographic
<Osaka Bay
<CLR ˘
Beep Off> SAFETY
➥ Push [CLR] to stop the beep, then push [ENT] to change
to the channel specified by the calling station for voice
communication; push other key to ignore the Geographi
-
cal Area call.
➥ Monitor the selected channel for an announcement from
the calling station.
When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all Geographical Area
calls are received, regardless of your position.
D Receiving a Position Request call
While monitoring Channel 70 and a Position Request call is
received:
➥ “Received POS Request” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to reply to
the call; push [CLR] to ignore the call.
25W INT
TAG
Received
POS Request
<Paul
<CLR ˘
Beep Off> SAFETY
D Receiving a Position Report call
While monitoring Channel 70 and a Position Report call is
received:
➥ “Received POS Report” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to reply to
the call; push [CLR] to ignore the call.
• After transmitting a reply call, push [ENT] to display the position
information, or push [CLR] to exit the condition.
25W INT
TAG
Received
POS Report
<Paul
<CLR ˘
Beep Off> SAFETY

Icom IC-M604 Specifications

General

Brand	Icom
Model	IC-M604
Category	Transceiver
Language	English