31
6
DSC OPERATION
6
D Transmitting a Position Reply call
Transmit a Position Reply call when a Position Request call
is received.
q Enter “Position Reply” in DSC menu.
DSC Menu ➪ Position Reply
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Rotate [SELECTOR] to select the desired individual ad-
dress or ID code, push [ENT].
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is
connected, next steps e and r (Current position/time
programming) do not appear. Go to step
t.
e The position information appears. Edit your position data
(latitude and longitude) directly with the keypad. (p. 18)
r After editing the position data, push [ENT] to set. Then edit
the current UTC time directly with the keypad, push
[ENT].
--DSC Menu--
Position Reply Ready
<CLR˘Exit / ENT˘OK>
t Push [ENT] to transmit the Position Reply call to the se-
lected station.
• Your position data is transmitted, when [ENT] is pushed.
D Transmitting a Position Report Reply call
Transmit a Position Report Reply call when a Position Re-
port call is received.
q Enter “POS Report Reply” in DSC menu.
DSC Menu ➪ POS Report Reply
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Rotate [SELECTOR] to select the desired individual ad-
dress or ID code, push [ENT].
e Push [ENT] to transmit the Position Report Reply call to
the selected station.
D Transmitting a Polling Reply call
Transmit a Polling Reply call when a Polling Request call is
received.
q Enter “Polling Reply” in DSC menu.
DSC Menu ➪ Polling Reply
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Rotate [SELECTOR] to select the desired individual ad-
dress or ID code, push [ENT].
e Push [ENT] to transmit the Polling Reply call to the se-
lected station.
To Next Page
Loading...
Need help?
General
