Icom IC-M604 - Block Diagram

36
6
DSC OPERATION
■ Received messages
The transceiver automatically stores up to 20 distress mes-
sages and 20 other messages. The messages can be used
as an assistance to the logbook.
D Distress message
q Enter “Distress” in DSC menu.
DSC Menu ➪ Received Calls ➪ Distress
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Rotate [SELECTOR] to select the desired message, push
[ENT].
• Messages which are blinking have not been read.
• The received messages are stored in “Distress” in DSC menu if
its category or format specifier is ‘Distress.’
--DSC Menu--
Select Message
˘Distress
Distress Ack
<CLR˘Exit / ENT˘OK>
e Rotate [SELECTOR] to scroll the selected message.
--DSC Menu--
Distress
<John
Explosion
LAT: 12°34.567N
LON:123°45.678W
<CLR˘Exit / CE˘Del>
Rotate
r Push [CLR] to exit the condition or push [CE] to clear the
displayed message and returns to DSC menu.
D Other messages
q Enter “Other” in DSC menu.
DSC Menu ➪ Received Calls ➪ Other
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
w Rotate [SELECTOR] to scroll to the desired message,
push [ENT].
• Messages which are blinking have not read.
--DSC Menu--
Select Message
Individual Call
Group Call
Position Replay
All Ships Call
<CLR˘Exit / ENT˘OK>
˘Individual Call
e Rotate [SELECTOR] to scroll the message.
• The stored message has various information and depending on
the type of Distress call.
--DSC Menu--
Individual Call
<Paul
Routine
F3E simplex
CH08
<CLR˘Exit / CE˘Del>
r Push [CLR] to exit the condition or push [CE] to clear the
displayed message and returns to DSC menu.