Icom IC-M604 - D Receiving a Polling Request Call; D Receiving a Position Reply Call

35
6
DSC OPERATION
6
D Receiving a Polling Request call
While monitoring Channel 70 and a Polling Request call is
received:
➥ “Received POLL REQ” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to reply to
the call; push [CLR] to ignore the call.
25W INT
TAG
Received
POLL REQ
<Paul
<CLR ˘
Beep Off> SAFETY
D Receiving a Position Reply call
While monitoring Channel 70 and a Position Reply call is re-
ceived:
➥ “Received POS Reply” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to display
the position information; push
[CLR] to ignore the reply
call.
25W INT
TAG
Received
POS Reply
<Paul
<CLR ˘
Beep Off> SAFETY
D Receiving a Position Report Reply call
While monitoring Channel 70 and a Position Report Reply
call is received:
➥ “Received POS Reply” appears in the display.
➥ Push [CLR] to stop the beep, then push [ENT] to display
the position information; push
[CLR] to ignore the reply call.
25W INT
TAG
Received
POS Reply
<Paul
<CLR ˘
Beep Off> SAFETY
D Receiving a Polling Reply call
While monitoring Channel 70 and a Polling Reply call is re-
ceived:
➥ “Received POLL Reply” appears in the display.
➥ Push [CLR] to stop the beep, then push [CLR] again to
exit the condition.
25W INT
TAG
Received
POLL Reply
<Paul
<CLR ˘
Beep Off> SAFETY