Icom IC-M604 Instruction Manual

42
7
OTHER FUNCTIONS
q Push [F], then push [8•
FOG
] to enter auto foghorn mode.
25W INT
TAG
˘UNDERWAY
STOP
<ENT˘OK> CALLING
then push
Push ,
w Rotate [SELECTOR] to select the desired foghorn pat-
tern, push [ENT].
• ‘UNDERWAY,’ ‘STOP,’ ‘SAIL,’ ‘TOW’ are available. (p. 41)
• Even if [ENT] hasn’t been pushed, the display automatically
changes to the next step after about 5 sec. of inactivity.
e Rotate [SELECTOR] to adjust the foghorn level, push [ENT].
• The foghorn level is adjustable in 31 steps.
• Even if [ENT] hasn’t been pushed, the display automatically
changes to the next step after about 5 sec. of inactivity.
25W INT
TAG
FOGHORN
15
<ENT ˘ OK> CALLING
25W INT
TAG
FOGHORN
15
UNDERWAY CALLING
Rotate
Push
The foghorn pattern, selected
Foghorn
level
r To return to normal operation, repeat step q.
When a DSC call is received, the automatic foghorn func-
tion is interrupted with an automatic return to the trans
-
ceiver mode. The transceiver’s display indicates ‘Receiv
-
ing DSC calls.’ (p. 32)
■ RX speaker function
The IC-M604 has an RX speaker function. When this func-
tion is turned ON, the received audio can be heard on the
deck or tower via a hailer speaker.
Connect a hailer speaker as described on page 46.
q Push [F], then push and hold [7•
HAIL
] for 1 sec. to enter
the RX Speaker mode.
• “RX ” appears.
25W INT
RX
TAG
RX
15
<ENT˘OK> CALLING
Push ,
then push and hold
for 1 sec.
w Rotate [SELECTOR] to adjust the audio output level,
push [ENT].
e To return to normal operation, repeat step q.
While in the RX speaker mode, rotate [SELECTOR]
while pushing and holding
[7•
HAIL
] after pushing [F], to
adjust the audio output level. After adjusting, push
[ENT].
• Rotate [SELECTOR] within 1 sec. after pushing [7•
HAIL
].
Otherwise the transceiver returns to the normal operation.

Icom IC-M604 Specifications

General

Brand	Icom
Model	IC-M604
Category	Transceiver
Language	English