45
8
SET MODE
8
D Radio power
(Appears when a COMMANDMIC™ is connected)
This item sets the Radio power function ON or OFF.
ON : The transceiver’s power is controlled by the optional
command microphone. When the command micro
-
phone is turned OFF, the transceiver will also be
turned OFF automatically.
OFF :
The transceiver’s power is not controlled by the optional
command microphone. Even if the command microphone
is turned OFF, the transceiver will continue to work.
(Default: ON)
--Set Mode--
Radio Power
˘ON
OFF
D Scrambler type
(Appears when a scrambler unit is installed)
When an optional scrambler unit* is installed, the scrambler
type can be selected in Set mode depending on dealer setting.
* The UT-98 is a discontinued model, and the current model
is the UT-112.
D Scrambler code
(Appears when a scrambler unit is installed)
When an optional scrambler unit is installed, the scrambler
code can be set depending on dealer setting.
When the UT-112 is installed, 32 codes (1 to 32) can be se
-
lected.
When the UT-98* is installed, 128 codes (0 to 127) can be
selected.
D Favorite channel
This item sets the Favorite channel function ON or OFF.
The favorite channel is programmed by the TAG channel set
-
ting (p. 15).
ON :
[Y]/[Z] keys on the microphone select the favorite
channels in the selected channel group in sequence
when pushed.
OFF :
[Y]/[Z] keys on the microphone select all channels in
the selected channel group in sequence when pushed.
(Default: ON)
--Set Mode--
Favorite CH
˘ON
OFF
--Set Mode--
Scrambler Code
4
≤
3
2
˘1
<CLR˘Exit / ENT˘OK>
--Set Mode--
Scrambler Code
3
≤
2
1
˘0
<CLR˘Exit / ENT˘OK>
(Default: 0)
When UT-98 is installed
(Default: 1)
When UT-112 is installed
(Default: UT-112)
--Set Mode--
Scrambler Type
UT-98
˘UT-112
To Next Page
Loading...
Need help?
General
