Icom iC-M605 - D Receiving an All Ships Call

52
8
DSC OPERATION
New2001
■ Receiving DSC calls (Continued)
3. Push any [Close Call RCVD
Window]
.
• Enter the DSC Task mode
DSC Task mode (pp. 29, 30)
• Automatically selects the channel that
is proposed by the called station for
voice communication.
• Rotate [CH/ENT] to view the call
contents.
4. Hold down [PTT] to communicate.
5. Push [Standby]
to return to
the Main screen.
D Receiving an All Ships call
1. When an All Ships call is received:
• Alarm sounds.
• The following screen is displayed
and the backlight blinks.
• “
” blinks.
2. Push any [Alarm Off] .
3. Select your action.
[Ignore]*: Ignores the Call and
returns to the Main screen.
* Displayed only when
“Single” is selected in the
PROCEDURE menu.
(p. 62)
[Hold]: Holds the RX call task,
and returns to the Main
screen.
[Pause]: Push [Pause]
to
pause the countdown.
• To restart the countdown,
push [Resume] .
[Accept]: Push [Accept] to
enter the DSC Task mode.
DSC Task mode (pp. 29, 30)
• Monitor the channel specied by the
calling station for an announcement
from the calling station.
(Example: Channel 16)
• Rotate [CH/ENT] to view the call
contents.
4. Push [Standby] to return to
the Main screen.