Icom iC-M605 - AIS Receiver

61
8
DSC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
• Discrete
Select whether or not to sound an alarm
when receiving a DSC call while in the
Radio Telephone (RT) mode or DSC
Task mode.
1. Push [MENU].
2. Select “Discrete,”
then push [ENT].
( DSC Settings > Alarm Status >
Discrete)
+
Push
Rotate
3. Select the option , then push [ENT].
• On: Alarm sounds. (Default)
• Off: Alarm does not sound.
4. Push [MENU] to return to the Main
screen.
D Setting the Channel 70
Squelch level
Set the squelch level on Channel 70.
The transceiver has 11 squelch levels
between 1 (loose squelch), 10 (tight
squelch) and ʻOpenʼ (squelch is
completely open).
1. Push [MENU].
2. Select “CH 70 SQL Level,”
then
push [ENT].
3. ( DSC Settings > CH 70 SQL Level:)
+
Push
Rotate
4. Adjust the squelch level until the
noise just disappears.
+
Push
Rotate
5. Push [MENU] to return to the Main
screen.
• Self-Terminate
Select whether or not to sound an alarm
when receiving the same Distress call.
1. Push [MENU].
2. Select “Self-Terminate,”
then push
[ENT].
( DSC Settings > Alarm Status >
Self-Terminate)
+
Push
Rotate
3. Select the option , then push [ENT].
• On: Alarm sounds. (Default)
• Off: Alarm does not sound.
4. Push [MENU] to return to the Main
screen.