Icom iC-M605 - 9 Other Functions; Using the Intercom

65
9
OTHER FUNCTIONS
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■ Using the Intercom
The optional Intercom function enables you to talk between
the deck and the cabin. The optional RC-M600
command
head, HM-195 commandmicIV
™
*, or HM-229 commandmicV
™
is required for Intercom operation.
L Connect the RC-M600 as described on page 94.
L Connect the HM-195* or HM-229 as described on page 98.
*Not usable for the IC-M605EURO.
• Transmitting is disabled while using the intercom.
• The received call audio is muted while using the intercom.
1. Push [MENU].
2. Select “Intercom,”
then push [ENT].
3. Select the unit, then
push [ENT].
• Enters the Intercom
mode.
4. Hold down [Call]
to sound the
intercom beeps.
• The transceiver
and the command
head or command
microphone sound
beeps while holding
down [Call].
• “Call” is displayed.
5. After releasing [Call], hold down [PTT] and speak into
the microphone at your normal voice level.
• “ Talk” is displayed.
L To adjust the transceiver or command head’s intercom
volume level, rotate [VOL/SQL].
L To adjust the command microphone’s intercom volume
level, rotate [VOL/SQL] (Dial) on the command microphone.
6. After releasing [PTT], you can hear the response
through the speaker.
7. Push [EXIT] to return to the Main screen.
NOTE: While in the Intercom mode, the transmit and
receive functions are disabled. When the transceiver is
transmitting, the Intercom function is disabled.
+
Push
Rotate