Icom IC-V80 User Manual

43
10
SET MODES
■ Initial Set mode programming
The Initial Set mode can be accessed at power ON and al-
lows you to set seldom-changed settings, to suit your prefer-
ence and operating style.
D Initial Set mode operation
q While pushing and holding [] and [] , turn the power
ON to enter the Initial Set mode.
w Push [] or [] to select the desired item.
e Rotate [VOL] to select the option or value.
r To exit the Initial Set mode, push [# ENT].
• Time-out timer (p. 44)
• Auto repeater* (p. 44) • Auto power-OFF (p. 44) • Lockout (p. 45)
• Squelch delay (p. 45)
• DTMF speed (p. 45)
• Dial assignment (p. 45)
• Display type (p. 46)• Power save (p. 46)• Select speed (p. 46) • LCD contrast (p. 46)
• Battery protection
function (p. 47)
• Microphone simple
mode (p. 47)
• Key-touch beep (p. 44)
• Auto low power (p. 47)
*Appears for only the U.S.A.
version transceivers.
: Push
: Push

Icom IC-V80 Specifications

General

Frequency Range	136-174 MHz
Mode	FM
Waterproof	IP54
Dimensions	58 x 112 x 30 mm
Operating Voltage	7.2 V DC
Channels	207 (200 memory channels, 6 scan edges, and 1 call channel)