Icom IC-V80

54
14
15
9
15
SPECIFICATIONS
D General
• Frequency coverage : (unit: MHz)
Version TX RX
U.S.A.
AUS
144–148 136–174*
CHN
EXP
136–174* 136–174*
EUR
UK
KOR
144–146 144–146
* Guaranteed: Only 144–148 MHz range
• Mode : FM, FM-N
• Number of memory channels : 207
(incl. 6 scan edges and 1 Call channel)
• Usable temperature range : –20°C to +60°C; –4°F to +140°F
• Tuning steps : 5,
10, 12.5, 15, 20, 25, 30 and
50 kHz
• Frequency stability : ±2.5 ppm
(–20°C to +60°C; –4°F to +140°F)
• Power supply : Icom specified battery pack/case
• Current drain (at 7.2 V DC: typical)
Transmit at 5.5 W (High) : 1.4 A
at 2.5 W (Mid.) 0.9 A
at 0.5 W (Low) 0.6 A
Receive standby : 65 mA
power save 20 mA
max. audio 310 mA (internal speaker)
180mA (external speaker)
• Antenna connector : BNC (50 W)
• Dimensions : 58(W)
×112(H)×30(D) mm;
(projections not included) 2
9
⁄32(W)×4
13
⁄32(H)×1
3
⁄16(D) in
• Weight (approx.)
(without battery pack/case and ant.) : 140 g; 4.9 oz
D Transmitter
• Modulation system : Variable reactance freq. modulation
• Output power (at 7.2 V DC) : High 5.5 W, Mid. 2.5 W, Low 0.5 W.
• Max. frequency deviation : FM
(wide) ±5.0 kHz
FM (narrow) ±2.5 kHz
• Spurious emissions : Less than –60 dBc
• External mic. connector :
3-conductor 2.5 (d) mm (
1
⁄10 ˝)/2.2 kΩ
D Receiver
• Receive system : Double-conversion superheterodyne
• Intermediate frequencies : 1st: 21.7 MHz, 2nd: 450 kHz
• Sensitivity (at 12 dB SINAD) : –0.14 μV typ.
• Squelch sensitivity (threshold) : –0.1 μV typ.
• Selectivity : FM (wide) 70 dB typ.
FM (narrow) 50 dB typ.
• Spurious and image rejection : 75 dB typ.
• Intermodulation : FM
(wide) 70 dB typ.
FM (narrow) 65 dB typ.
• Audio output power (at 10% distortion)
Internal speaker : 0.75 W typ. with a 16 Ω load
External speaker : 0.45 W typ. with a 8 Ω load
• External speaker connector : 3-conductor 3.5(d) mm; (
1
⁄8˝)/8 Ω
All stated specifications are subject to change without notice or
obligation.
1
2
3
4
5
6
7
8
10
11
12
13
16
17
18
19