IV
QUICK REFERENCE GUIDE
Direct frequency input from the key-
pad is also available.
➥ To enter the desired frequency,
enter 6 digits starting from the
100 MHz digit.
•Entering three* to five digits then
pushing [✱•
ENT
] will also set the
frequency. (*Some versions only re-
quires two digits.)
• When a digit is mistakenly input,
push [D.
CLR
] to abort input.
5. Transmit and receive
➥ Push and hold [PTT] to transmit, then speak into the mi-
crophone; release to receive.
■ Repeater operation
1. Setting duplex
➥ Push [A•
FUNC
], then [4•
DUP
] sev-
eral times to select minus duplex
or plus duplex.
• The USA/CSA versions have an auto
repeater function, therefore, setting
duplex is not required.
2. Repeater tone
➥ Push [A•
FUNC
], then [1•
TONE
]
several times until “ ” appears, if
required.
To Next Page
Loading...
