SET MODE
• Weather alert* (p. 62)
• Repeater tone
frequency (p. 59)
• Tone squelch
frequency (p. 59) • DTCS code (p. 60) • DTCS polarity (p. 60)
• Offset frequency (p. 60)
• Reverse function (p. 60)
• Tuning step (p. 60)
• Scan pause timer (p. 61)
• Function key timer (p. 61)
• LCD backlight
(p. 61)
• Tx permission
(p. 61)
• Wide/Narrow setting
(p. 62)
• Bank link function
†
(p. 62)
• Bank setting
†
(p. 62)
*Available for IC-V82 [USA]/[CSA] versions only.
†
Appears when accessing SET MODE from memory mode only.
: Push
: Push
Push , then push to enter SET MODE (p. 59).
SET
FUNC
8
A
NOTE: When the display type setting (pgs. 16, 65) in INITIAL
SET MODE
is selected other than “FR” (“CH” or “nm”) and
accessing
SET MODE from memory mode, most of set mode
items are restricted.
To Next Page
Loading...
