29
7
DTMF MEMORY
7
D Manual DTMF code transmission
While pushing [PTT], push digit keys, [A•
FUNC
], [B•
CALL
],
[C•
MR
], [D•
CLR
], [#•
BANK
] and [✱•
ENT
] to transmit a DTMF
code sequence manually.
• [✱•
ENT
] transmits tone “E”, [#•
BANK
] transmits tone “F.”
■ DTMF transmission rate
When slow DTMF transmission rates are required with DTMF
memory transmission (as for some repeaters), the trans-
ceiver’s rate of DTMF transmission can be adjusted.
qWhile pushing and holding [
YY
] and
[
ZZ
], turn the power ON to enter
INI
-
TIAL SET MODE
.
wPush [
YY
] or [
ZZ
] several times until
“dtd” appears.
eRotate [VOL] to select the desired
DTMF transmission rate.
• Four rates are available: “1” (100 msec.
intervals) is the fastest; “5” (500 msec.
intervals) is the slowest.
rPush [✱•
ENT
] to exit
INITIAL SET MODE
.
T. SCANP. BEEP
To Next Page
Loading...
