II
QUICK REFERENCE GUIDE
D About AD-99N
The adapter (Spacer A) only is required for the IC-V82/U82
series. When removing the spacer (Spacer B/C),
push the
latch carefully with your finger to remove the spacer (Spacer
B/C) from the adapter (Spacer A).
R CAUTION!
• DO NOT push or force the latch with a screw driver, etc.,
to remove it.
• DO NOT bend the latch when the adapter and spacer are
not joined together. This will cause weakening of the latch
plastic.
• Both cases may break the latch and it may not be able to
be reattached.
D Antenna
Attach the antenna to the transceiver
as illustrated at right.
D Belt clip
Conveniently attaches to your belt.
Attach the belt clip with the supplied screws using a phillips
screwdriver.
To Next Page
Loading...
Need help?
General
