53
11
DIGITAL MODE OPERATION
11
■ Setting other items
qPush [A•
FUNC
] and [0•
OPT
] to enter
OPTION SET MODE
, then
push [
YY
] or [
ZZ
] several times to select the desired item.
wRotate [VOL] to select the desired value or condition.
•To exit
SET MODE
, push [✱•
ENT
] (or [D•
CLR
]).
DD
Auto Reply
During digital mode operation, auto reply function is available.
This function replies to an individual station call even you are
away from the transceiver. (default: OFF)
After the manual transmission (pushing [PTT]) or message
transmission, the Auto Reply setting returns to OFF automat-
ically.
DD
Digital Code
Sets the desired digital code for digital code squelch opera-
tion. Total of 100 codes (00–99) are available. (default: 00)
DD
Auto data Transmission
During low-speed data operation, auto data transmission
function is available. This function transmits when data has
been input from PC via the [DATA] jack. (default: OFF)
After the manual transmission (pushing [PTT]), the Auto
Transmission setting returns to OFF automatically.
To Next Page
Loading...
