INITIAL SET MODE
• ALC function (p. 68)
• Battery protection function (p. 68)
• S-meter squelch (p. 68)
• Mic simple mode (p. 67)
• Key touch beep (p. 63) • Time-out timer (p. 63) • Auto repeater* (p. 64) • Auto power-off (p. 64)
• Squelch delay (p. 64)
• DTMF rate (p. 65)
• Repeater lock-out (p. 64)
• Dial assignment (p. 65)
• Display type (p. 65)
• LCD contrast (p. 65)• Power save (p. 66)• Tuning speed acceleration (p. 66)
• Digital monitor
setting
†
(p. 66)
• Monitor key action
(p. 66)
*Available for [USA]/[CSA] versions only.
†
Appears only when an optional UT-118 DIGITAL UNIT is installed.
: Push
: Push
While pushing and holding , push
PWR
to enter INITIAL SET MODE (p. 63).
To Next Page
Loading...
