ID Technology ClearMark - Advanced Settings: Network and Factory Resets

ClearMark™ Installation, Operation & User Manual – Page 64
V 1.S.10 January 2021
V-1.S.1
Advanced Settings
Used to modify the Network Settings and Restore HMI or Printer to factory default
parameters.
HMI Network configuration
This window allows configuration of the network settings of the HMI. By default, the HMI is set
to:
- IP: 192.168.16.203
- Mask: 255.255.255.0
- Gateway: 192.168.16.1
- Port: 9991 (not editable)
NOTE:
- Only the Admin level has access to this tab.
- Network configuration is explained below.