2 Sound Function Configuration Procedure
21-2 WindO/I-NV4 User’s Manual
This section describes the configuration procedure for the Sound function.
2.1 Configuring Sound Files & Trigger Conditions
● To play a sound file when a value of device address changes from 0 to 1
1 On the Configuration tab, in the System Setup group, click Sound.
The Sound Settings dialog box is displayed.
2 Double-click the cell in the File Name column to register a sound file.
The Open dialog box is displayed.
3 Specify the sound file to register and click Open.
2 Sound Function Configuration Procedure
HG3G
HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T
HG4G HG1G HG1P
To Next Page
Loading...