WindO/I-NV4 User’s Manual 14-7
1 Overview
14
Data Log Function
1.5 Using the Data
The saved data can be used in the following ways.
*1 SD memory card for HG5G/4G/3G/2G-V, HG4G/3G and HG2G-5F, USB flash drive for HG2G-5T and HG1G/1P
• Display the data in the Line
Chart
Configure the data channel
numbers and data numbers
and display the data in the Line
Chart.
For details, refer to “4.1
Display the Data in the Line
Chart” on page 14-34.
• Save to and read from an
external memory device
*1
Output data from the MICRO/I
to the an external memory
device as a CSV file and use it
on a computer.
For details, refer to “4.3 Saving
the Data as a CSV File” on
page 14-45.
• Display the data with the
Numerical Input or the
Numerical Display
Copy the data to an internal
device and display it with the
Numerical Input or the
Numerical Display.
For details, refer to “4.2
Displaying Data as Numerical
Values” on page 14-36.
Sampling Time Data001 Data002 Data003
01/01/2011 12:00:00 20 120 201
01/01/2011 12:10:00 21 121 204
01/01/2011 12:20:00 22 122 206
01/01/2011 12:30:00 23 123 206
01/01/2011 12:40:00 24 124 210
Data Log data
To use with the MICRO/I To use with devices other than the MICRO/I
External Memory Device
Book1
Data Log data
(CSV)
Sampling Time Data001 Data002 Data003 Data004
24
124
210
Data001
Data002
Data003
To Next Page
Loading...
Need help?
General
