IDEC MICRO/I HG1G-4VT22TF Series User Manual

4 Customizing WindO/I-NV4
2-60 WindO/I-NV4 User’s Manual
4.1 Configuring the Work Environment
You can configure WindO/I-NV4 settings such as mode and options when editing screens, the path when selecting
files, and the path for automatic backups. The settings configured here are saved even when you exit WindO/I-NV4.
The procedure for configuring the work environment is shown below.
1 Click and then click WindO/I-NV4 Options.
The WindO/I-NV4 Options dialog box is displayed.
2 Change the settings on each tab as desired.
4 Customizing WindO/I-NV4

IDEC MICRO/I HG1G-4VT22TF Series Specifications

General

Brand	IDEC
Model	MICRO/I HG1G-4VT22TF Series
Category	Control Panel
Language	English