WindO/I-NV4 User’s Manual 5-11
2 Creating and Manipulating WindO/I-NV4 Screens
5
Screen
2.6 Reusing Screens
You can copy screens from other project data.
1 On the Home tab, in the Screens group, click Reuse.
2 Select project data that includes the screens to copy and click OK.
The Open dialog box is displayed.
If you right click a screen folder or screen in the Project window and click Reuse Screens, the Open
dialog box is displayed.
If a password has been configured for the project data, the Password Screen will be displayed.
The password to enter varies based on the check box setting of the Use Password to open a Project
found under the Options tab in the Security dialog box.
When this check box is checked, enter the password for Use Password to open a Project.
When this check box is unchecked, enter the password for the user account assigned to the Administrator
security group.
For details, refer to Chapter 23 “User Accounts and the Security Function” on page 23-1.
To Next Page
Loading...
Need help?
General
