IDEC MICRO/I HG1G-4VT22TF Series - Chapter 9 Lamps; Pilot Lamp; How the Pilot Lamp Is Used

WindO/I-NV4 User’s Manual 9-1
9
Lamps
This chapter describes the setup for the lamp parts and related MICRO/I operations.
1.1 How the Pilot Lamp is Used
Pilot Lamp parts display drawing objects. The value of a bit device is used to switch the drawing object displayed.
• Switch and display pictures by values of device addresses
Chapter 9 Lamps
1Pilot Lamp
HG3G HG2G-5FHG5G-V HG4G-V HG3G-V HG2G-V HG2G-5T HG4G HG1G HG1P
MICRO/I
External device
0
1