1 Monitoring with WindO/I-NV4
25-18 WindO/I-NV4 User’s Manual
1.3 Display the Value of Device Address in Popup
During monitoring, mousing over device addresses displayed in the Object List window or device addresses in a
script opened in Script Editor displays the current value in a popup window.
• Object List window
• Script Editor
1.4 Highlighting Objects While Satisfying Conditions
When the Trigger Condition is satisfied during monitoring, the objects for which conditions are being satisfied are
highlighted in the Object List window.
• Popup viewing of values of device addresses in the Object List window works only if the screen
displayed in the Object List window matches the screen displayed on the MICRO/I.
• Popup viewing of values of device addresses in Script Editor works only if the script during editing is being
used by a global script command or a script command on the screen displayed on the MICRO/I.
• The maximum number for popup window is 80 characters. Any characters entered after the 80th will not
be displayed.
• If 65 or more device addresses are displayed in the Object List window, monitor refreshing and popup
message will slow down.
To Next Page
Loading...
Need help?
General
